Vacuum Forming kple Pressure Forming me dzodzro be wòasɔ ɖe Wò Adzɔnuwo wɔwɔ ƒe Hiahiãwo Nu

 

Ne wole dzoxɔxɔ ƒe mɔnu nyuitɔ tiam hena plastik-nugoewo wɔwɔ la, vovototo siwo le vacuum wɔwɔ kple nyaƒoɖeamenu wɔwɔ dome gɔmesese le vevie ŋutɔ. Mɔnu eveawo siaa trɔa dzoxɔxɔ ƒe agbalẽviwo wozua nusiwo wɔa dɔ abe azigolowo, atikutsetsewo ƒe nugoewo, nuɖuɖu bablawo, kple dɔwɔƒewo ƒe nugoewo ene. Gake woƒe ŋutete tɔxɛwo, nuwo ƒe ɖekawɔwɔ, kple dɔwɔwɔ ƒe nyonyome na wosɔ nyuie wu na adzɔnuwo wɔwɔ ƒe nɔnɔme tɔxɛ aɖewo.

 

 

Vacuum Forming: Nuwɔwɔ Blewu Kple Eƒe Dɔwɔwɔ Nyuie

 

Vacuum ƒe wɔwɔme, si woyɔna hã be thermoforming alo vacuum molding, bia be woado dzo na thermoplastic gbadzɛ aɖe vaseɖe esime wòate ŋu abɔbɔ eye emegbe woazã vacuum pressure atsɔ atrɔ asi le eŋu. Dɔa dzea egɔme kple agbalẽ si wodo dzoe la ƒoƒo ɖe aŋenu aɖe dzi. Emegbe ya si me ya mele o ɖea ya ɖa le agbalẽa kple aŋea dome, si hea nusi wotsɔ wɔe la wòzua nɔnɔme si wodi. Ne wonya fa ko la, wotrɔa asi le aŋe si wowɔ la ŋu wòsɔna ɖe nɔnɔme mamlɛtɔ nu.

 

Nu Vevi Siwo Le Vacuum Forming Me:

Nusiwo Wozãna ƒe Ðekawɔwɔ: Ewɔa dɔ kple PET, PS, PVC, kple dzoxɔxɔnu bubuwo.

Dɔwɔwɔ: Enyo ŋutɔ na nugoe siwo mebɔbɔ o, siwo me woate ŋu aƒo ƒu ɖekae abe azigolowo, clamshell-bablawo, kple atikutsetsegoe siwo me goglo o ene wɔwɔ.

 

Viɖe siwo le eŋu:

Dɔwɔnuwo zazã ƒe gazazãwo dzi ɖena kpɔtɔna le aŋɔ siwo le bɔbɔe wu ta.

Tsitretsitsi ƒe ɣeyiɣi siwo le kabakaba wu na ewɔwɔ si ƒe lolome lolo.

Dɔwɔwɔ si zãa ŋusẽ nyuie eye womegblẽa nu boo aɖeke o.

 

Seɖoƒewo:

Nusiwo me mekɔ tututu o ƒe nyametsotso ne wotsɔe sɔ kple nyaƒoɖeamenu ƒe wɔwɔme.

Gli ƒe titrime si le tsɛ wu ate ŋu ana xɔa ƒe ŋusẽ nasẽ.

 

Wolɔ̃a mɔnu sia le afisiafi na dɔ siwo tsɔa gazazã nyuie kple tɔtrɔ kabakaba ɖoa nɔƒe gbãtɔ, vevietɔ ne mehiã be woawɔ anyigba ƒe nɔnɔme siwo gɔme sese sesẽ alo woahe wo goglo o.

Nyaƒoɖeamenu ƒe Nɔnɔme: Eteƒewɔwɔ Kple Enɔanyi

 

Nyaƒoɖeamenu ƒe wɔwɔme tua vacuum wɔwɔ ƒe ɖoɖoa ɖo to ya si woƒo ɖe plastic-gbadzɛ si wodo dzoe la tame. Nyaƒoɖeamenu eve ƒe ɖoɖo sia (yaƒoƒo si le ete kple ya ƒe nyaƒoɖeamenu le etame) zia nusi wotsɔ wɔe dzi be wòaka ɖe aŋɔa ŋu sesĩe wu, si léa nu siwo le nyuie wu eye wòkpɔa eƒe go siwo le ɖaɖɛ wu.

 

Nyaƒoɖeamenu ƒe Nɔnɔme Vevi Siwo Le:

Nusiwo wotsɔ wɔe ƒe ɖekawɔwɔ: Ewɔ ɖeka kple PP, PS, PLA, PET, kple tiatia siwo gblẽa nu le nugbagbewo ŋu abe PLA ene.

Dɔwɔwɔ: Esɔ na geometri siwo sesẽ, anyigba siwo dzi woŋlɔ nu ɖo, kple nugoe siwo me woate ŋu awɔ dɔ sesẽ siwo hiã be woanɔ anyi eteƒe nadidi wu, abe dɔwɔƒewo ƒe bablawo alo nuɖuɖugoe siwo woate ŋu azã ake ene.

 

Viɖe siwo le eŋu:

Superior anyigba wu enu kple nɔnɔme ŋutɔŋutɔwo (le kpɔɖeŋu me, ati nuku, lãgbalẽ).

Gli ƒe titrime si nɔa anyi ɖaa kple xɔa ƒe blibonyenye si nyo wu.

Eɖea mɔ ɖe nutata kple nutete siwo goglo wu ŋu.

 

Seɖoƒewo:

Dɔwɔnuwo zazã ƒe gazazã si lolo wu le aŋɔ siwo ŋu wodo ŋusẽe ta.

Tsitretsitsi ƒe ɣeyiɣi siwo le blewu vie ne wotsɔe sɔ kple vacuum wɔwɔ.

Nyaƒoɖeamenu wɔwɔ nye tiatia si adzɔnuwɔƒe siwo hiã atsyɔ̃ɖoɖo deŋgɔwo alo akpa siwo wɔa dɔ siwo te ŋu nɔa te ɖe ezazã enuenu alo nɔnɔme sesẽwo nu la yina.

Tiatia le Vacuum Forming Kple Pressure Forming Dome

 

Be nànya mɔnu si sɔ kple wò dɔa la, bu nu siwo gbɔna ŋu:

 

1. Aɖaŋuwɔwɔ ƒe Sesẽme:

Vacuum forming sɔ na aɖaŋu bɔbɔe siwo me goglo o.

Nyaƒoɖeamenu wɔwɔ nyo wu na nɔnɔme siwo gɔme sese sesẽ kple nuŋɔŋlɔ siwo wotsɔ wu enu.

 

2. Nusiwo Hiã:

Wokpɔa PLA kple PP gbɔ nyuie wu to nyaƒoɖeamenu wɔwɔ me le woƒe ʋeʋẽ ƒe teƒe kɔkɔwo ta.

PET kple PVC wɔa dɔ nyuie le dɔwɔwɔ eveawo siaa me gake woate ŋu akpɔ nu tsitotsito nyuie wu le nyaƒoɖeamenu me.

 

3. Nuwɔwɔ ƒe Agbɔsɔsɔme:

Vacuum forming mexɔa ga geɖe na nusiwo woɖo ɖe ɖoɖo nu ƒe hatsotso gãwo.

Nyaƒoɖeamenu ƒe wɔwɔme na wòsɔ be ga si wòzãna do ŋgɔ na adzɔnu xɔasiwo alo esiwo wowɔ ɖe ɖoɖo nu la sɔ gbɔ wu.

 

4. Gazazã ƒe Mɔxenuwo:

Tia vacuum forming ne gadede gbãtɔ me dzi ɖeɖe kpɔtɔ nye nu vevitɔ.

Tia nyaƒoɖeamenu wɔwɔ na dɔ siwo axɔ ɣeyiɣi didi siwo bia be woanɔ anyi eteƒe nadidi eye woawɔ atsyɔ̃ɖoɖo si ŋu wokɔ.

 

Nu Mamlɛawo Ŋu Bubu

 

Vacuum kple pressure forming siaa naa viɖe vovovowo le wò adzɔnu ƒe taɖodzinuwo nu. Vacuum forming naa wowɔa nu kabakaba eye woƒe asi bɔbɔ na aɖaŋu siwo le tẽ, gake pressure forming naa wowɔa nu pɛpɛpɛ si hiã na akpa siwo sesẽ eye wole nyonyome nyuitɔ kekeake. Ne èda wò nuwo ƒe tiatia, atsyã ƒe nɔnɔmewo, kple ewɔwɔ ƒe lolome kpɔ la, àte ŋu atia mɔnu si ana dɔwɔwɔ nyuie, gazazã, kple dɔwɔwɔ nanyo ɖe edzi na wò adzɔnuwo wɔwɔ ƒe nuhiahiãwo.