Plastic Thermoforming me dzodzro tso Dɔwɔnu Ƒomeviwo, Mɔnuwo, Kple Dɔwɔnu Siwo Do Ƒome Kplii Me

Plastic Thermoforming me dzodzro tso Dɔwɔnu Ƒomeviwo, Mɔnuwo, Kple Dɔwɔnu Siwo Do Ƒome Kplii Me

Plastik ƒe dzoxɔxɔ ƒe nɔnɔmewɔwɔ mɔ̃ɖaŋununya, abe adzɔnuwo wɔwɔ ƒe mɔnu vevi aɖe ene, le nɔƒe vevi aɖe le egbegbe dɔwɔƒewo. Tso aŋɔsisimɔnu bɔbɔewo dzi va ɖo egbegbe nu vovovowo wɔwɔ dzi la, Plastic Thermoforming Machine ƒo nu tso ƒomevi vovovowo kple dɔwɔwɔ vovovowo ŋu. Nyati sia ku nu me tsitotsito le dzoxɔxɔ ƒe mɔ̃ɖaŋununya ƒe hatsotsowo, wɔwɔme mɔnuwo, kple dɔwɔnu siwo sɔ ŋu, eye eƒe taɖodzinue nye be yeana nuxlẽlawo nakpɔ nyatakaka blibo si me kɔ.

I. Dzoxɔxɔ ƒe Nɔnɔme Ƒomeviwo
Thermoforming Machine bia be woatsɔ nyaƒoɖeamenu alo yaƒoƒo ƒe ŋusẽ ado dzo na plastik-gbadzɛwo ahawɔ woƒe nɔnɔme ɖe aŋenuwo dzi be woatsɔ awɔ nu tɔxɛ aɖewo. Dzoxɔxɔ ƒe nɔnɔme ƒomevi geɖe siwo bɔe nye esi:

1. Dzoxɔxɔ ƒe wɔwɔme le agbalẽ tsɛwo ŋu:

Esia nye ƒomevi si bɔ wu, si sɔ na nu vovovowo wɔwɔ abe nubablɛɖakawo, agbawo, kple nutsyɔnu siwo zãa agbalẽ tsɛ siwo ƒe titrime mede 1.5mm o.

2. Dzoxɔxɔ ƒe wɔwɔme le agbalẽ ɣiwo ŋu:

To vovo na thin-gauge la, ƒomevi sia zãa nusiwo ƒe titrime zi geɖe wu 1.5mm, si wɔnɛ be wowɔa nusiwo sesẽ wu abe ʋu ƒe akpa aɖewo kple dɔwɔnuwo ƒe xɔwo ene.

3. Nyaƒoɖeamenu ƒe Dzoxɔxɔ ƒe Nɔnɔme:

Tsɔ kpe ɖe vacuum zazã atsɔ alé aŋe ɖe aŋenuwo ŋu la, wotsɔa nyaƒoɖeamenu dea aŋea ƒe akpa kemɛ be woakpɔ nyatakaka siwo de pɛpɛpɛ wu eye woƒe anyigbawo nanɔ gbadzaa wu, siwo sɔ na adzɔnuwo wɔwɔ si wodi vevie.

4. Dzoxɔxɔ si wotsɔa agbalẽ eve wɔe:

To ya dodo ɖe aŋekotoku eve dome me la, woléna ɖe aŋetu eve ƒe gowo ŋu le ɣeyiɣi ɖeka me, eye wowɔa akpa eve zi ɖeka, si ɖea vi na nu sesẽ siwo ƒe ƒuƒoƒo eve le wɔwɔm.

5. Do ŋgɔ na kekeɖenudɔwɔwɔ Thermoforming:

Plastik-gbadzɛwo keke do ŋgɔ hafi woawɔ dzoxɔxɔ ƒe nɔnɔme nana be nuawo ƒe titrime sɔ wu, vevietɔ wosɔ na nusiwo wohe goglo, si wɔnɛ be nusiwo wowɔ vɔ ƒe nyonyome nyona ɖe edzi.

II. Mɔnu Siwo Wotsɔna Ðoa Nui

Mɔ̃ si Wotsɔ Wɔa Dzoxɔxɔ Si Wowɔna Le Eɖokui Si: Mɔ̃ ƒe ŋusẽ zazã atsɔ ami aŋenuwo ɖe aŋenuwo me, siwo sɔ na nusiwo hiã na nuŋɔŋlɔ alo nyatakaka tɔxɛ aɖewo.

1. Ðeka Positive Mold (Plug Kpekpeɖeŋu / Forming / Billowing):

Mɔnu sia trɔa asi le aŋekotoku siwo fa la ŋu wòzua nɔnɔme tɔxɛwo to mɔ̃ ƒe ŋusẽ dzi, si sɔ na nusiwo ƒe nɔnɔme le bɔbɔe siwo le goglo alo le ƒoƒom.

2. Ðeka Negative Mold (Cavity Molding): .

To vovo na aŋɔ nyui ɖeka la, mɔnu sia zãa aŋɔ siwo le goglo, siwo hã sɔ na nɔnɔme siwo le bɔbɔe vie gake wowɔa nusiwo le goglo.

3. Etɔ̃ Mold Set:

Mɔnu si gɔme sese sesẽ wu si me wozãa aŋɔ nyuiwo, aŋɔ manyomanyowo, nusiwo wotsɔ blaa nu, kple nu bubu siwo wotsɔ blaa nu, siwo sɔ na aŋenu siwo gɔme sese sesẽ.

4. Aŋe si Wowɔ Ðekae:

Mɔnu sia ate ŋu abia be woazã aŋɔ ƒomevi vovovowo kple aŋɔwɔwɔ ƒe mɔnuwo atsɔ awɔ nusi wotsɔ ƒo ƒui, si ate ŋu alɔ nu vovovowo ɖe eme alo awɔ afɔɖeɖewo be woawɔ ɖe dɔwɔwɔ kple xɔtuɖaŋu ƒe nudidi tɔxɛwo dzi.

III. Do Ƒome Kple Dɔwɔnuwo

1. Dɔwɔnu Siwo Wotsɔna Klɔa Nu:

Ele vevie ŋutɔ na plastik-gbadzɛwo ƒe liƒo me léle ɖe asi le dzoxɔxɔ kple wo wɔwɔ ƒe dɔwɔwɔwo me, eye mɔ̃ siwo wotsɔ blaa nu siwo le abe xɔtunu ene kple esiwo ƒe nɔnɔme me mãe nye ƒomevi vevitɔ siwo sɔ na nusiwo wowɔ ƒe lolome kple nɔnɔme vovovowo.

2. Dzoxɔxɔnamɔ̃wo:

Wozãnɛ tsɔ doa dzo na plastik-gbadzɛwo wòdea dzoxɔxɔ si sɔ nu, eye zi geɖe la, elektrik-dzoxɔxɔmɔ̃wo, quartz-yaƒomɔ̃wo, kple dzoxɔxɔnamɔ̃ siwo me dzoxɔxɔ mele o hã nɔa eme.

3. Vacuum Dɔwɔnuwo:

Le dzoxɔxɔ ƒe wɔwɔme me la, yaƒoƒo ƒe ɖoɖoa kpena ɖe plastik-gbadzɛwo ŋu be woawɔ ɖeka kple aŋɔ ƒe nɔnɔme, si bia be woawɔ dɔwɔƒewo abe yaƒoƒo pɔmpiwo, ya ƒe tsigoewo, ʋuƒo, kple bubuawo ene.

4. Ya si Womiã ƒe Dɔwɔnuwo:

Ya si woƒo ƒu wɔa dɔ vovovowo le dzoxɔxɔ ƒe nɔnɔmewɔwɔ me, siwo dometɔ aɖewoe nye kpekpeɖeŋu nana le wɔwɔme, eɖeɖeɖa, kple dzadzɛnyenye me.

5. Dɔwɔnu Siwo Wotsɔna Faa Nu:

Fafa nye nuwɔwɔ ƒe akpa vevi aɖe, si wɔnɛ be aŋe ƒe wɔwɔme nɔa sesẽm kabakaba, wòléa nɔnɔme siwo wowɔ la me ɖe asi, eye wòɖea nuteɖeamedzi si le eme dzi kpɔtɔna.

6. Dɔwɔnu Siwo Wotsɔ Ðea Aŋe:

Demolding fia alesi woɖea aŋe ƒe akpa siwo wowɔ ɖa le aŋenuwo me, si ate ŋu abia mɔ̃ tɔxɛwo, yaƒoƒo, alo mɔnu bubuwo hena kpekpeɖeŋu.

7. Dɔwɔnu Siwo Wotsɔ Kpɔa Nuwo Dzi:

Dzɔdzɔmeŋusẽdzikpɔmɔ̃wo kpɔa dzoxɔxɔ ƒe wɔwɔme bliboa ƒe dɔwɔwɔ pɛpɛpɛ dzi, si me dzoxɔxɔ dzi kpɔkpɔ, ɣeyiɣi si woatsɔ awɔe, kple ya si me ya mele o kple ya si woƒo ɖe eme zazã hã le.

IV. Mɔ̃ɖaŋununya ƒe Etsɔme Nukpɔsusu
Esi mɔ̃ɖaŋununya ƒe ŋgɔyiyi yi edzi eye dɔwɔƒewo ƒe ŋgɔyiyi le edzi yim ta la, Fully Automatic Thermoforming Machine ayi edzi anɔ tɔtrɔm, si ana teƒe si keke wu kple kakaɖedzi si de ŋgɔ wu na plastic-nuwɔnawo wɔwɔ. Le etsɔme la, míate ŋu akpɔ mɔ be míakpɔ dɔwɔnu siwo me nunya le wu eye wowɔa dɔ nyuie wu, kpakple aŋenu siwo mewɔa nuvevi nutome o eye wowɔa dɔ nyuie wu zazã. Mɔ̃ɖaŋununya si wotsɔ wɔa dzoxɔxɔe awɔ akpa vevi aɖe le go vovovowo me, si ahe mɔnukpɔkpɔ geɖe vɛ na dɔwɔƒewo.

Nyanuwuwuw
To hatsotsowo me toto, dɔwɔnu siwo do ƒome kplii, kple etsɔme ŋgɔyiyi me Plastik Dzoxɔxɔ Mɔ̃, wokpɔ mɔ be nuxlẽlawo va se mɔ̃ɖaŋununya sia gɔme nyuie wu. Esi mɔ̃ɖaŋununya ƒe ŋgɔyiyi kple nu yeyewo le edzi yim ta la, mɔ̃ɖaŋununya kple dɔwɔnu siwo wotsɔ wɔa dzoxɔxɔe ana nuwɔwɔ nyuie nanyo ɖe edzi, aɖe gazazãwo dzi akpɔtɔ, eye wòana adzɔnuwo wɔwɔ ƒe dɔwɔƒewo nayi ŋgɔ.